Anycubic Photon Mono M7 Pro 3D Printer Bundle for Resin Printing

About this item

• 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
• 【Two-layer Curing】An uniquely engineered double-layer curing platform boosts the quantity of models cured per cycle and significantly enhances curing efficiency.
• 【Ultra Fast Speed】Anycubic Photon Mono M7 Pro achieved a high speed of 170mm/h on a 0.1mm layer thickness test using high-speed resin. At the same time, the printing speed of standard resin has been increased to 130mm/h, breaking boundaries and greatly improving printing efficiency, achieving true fast speed printing
• 【Advanced COB LighTurbo 3.0】The COB light source system, combined with Fresnel lenses and front-facing reflectors can reach the light angle within 3°, and light uniformity is more than 90%. Anycubic LighTurbo 3.0 is also equipped with a light-off compensation algorithm, which ensures that every layer of the model is successfully exposed and successfully removed from the mold, and improves the printing success rate.
• 【High-Precision 14K】With a 14K monochrome LCD screen with 13312*5120 resolution and 16.8x24.8 μm XY resolution, the Photon Mono M7 Pro is capable of printing holes as small as 0.3 mm in diameter, which is more than enough to handle fine printing tasks and make your models stand out.