ANYCUBIC Photon Mono M7 Resin 3D Printing Starter Bundle with Wash and Cure 3 Plus

About this item

• 【Speed Your Creativity】Anycubic Photon Mono M7 prints at speeds of up to 150mm/h with high speed resin and 90mm/h with regular 3d resin, resulting in shorter wait times and cost savings
• 【10.1 inch 14K Mono LCD】Photon Mono M7 is equipped with a 10.1-inch 14K monochrome screen, with a resolution of 13312 * 5120 and extremely fine XY axis pixels of 16.824.8 microns. It can achieve a minimum forming diameter of 0.15mm, a minimum outlet diameter of 0.3mm, making the model details outstanding/h with regular 3d resin, resulting in shorter wait times and cost savings
• 【Increased Capacity】Anycubic Wash and Cure 3 Plus now has a washing size of 8.97''x5.03''x10.23''. Compared to the Wash & Cure Plus, the volume of the washing basket has been raised by approximately 13.4% to 7.6L. This makes it suitable for a wider range of LCD 3D printers such as Photon Mono M5s, Photon Mono M7 Pro, Saturn 3/4 series, and others 10.6 inches and below.
• 【Print Up To 3X Faster】ANYCUBIC High Speed 3D Printer Resin 2.0 is specially developed for High Speed Resin 3D Printer like Anycubic Photon Mono M5s/M5s Pro/M7/M7 Pro. Its low viscosity and high activity contributes to decreasing exposure and curing time, realizing a 3X faster printing experience.
• 【Anycubic COB LighTurbo 3.0】The COB light source system combined with Fresnel lenses and front reflectors can achieve a light angle within 3° and light uniformity is more than 90%. Anycubic LighTurbo 3.0 is also equipped with a light-off compensation algorithm, which ensures that each layer of the model is successfully exposed and removed from the mould, improving the print success rate